Remote switch for EOS cameras with the N3-type socket. This remote switch has a self-timer, interval timer, long exposure timer and exposure-count setting feature. The timer can be set from 1 second to 99 hours. A new dial enables you to easily enter the numeric settings with a single thumb. It has an illuminated LCD panel and a ft/80cm cord. The TCN3 Timer/Remote Controller is a programmable electronic shutter release. When you connect it to your EOS SLR or DSLR it will allow you to control: 1. whenthe shutter opens (self-timer mode) 2. how frequentlythe shutter opens (interval timer mode) 3. how longthe shutter stays open (long-exposure timer mode) 4. User manual for the Canon Timer Remote Controller TCN3 contain basic instructions that need to be followed during installation and operation. Before starting your appliance, the user manual should be read through carefully. Follow all the safety instructions and warnings, and be guided by the given www.doorway.ru Connection: Canon 3-pin (N3).
This genuine Canon TCN3 is Canon's official exposure timer and remote control cord for their better 35mm and digital EOS cameras. (The RSN3 is the simpler remote-only cord.). I'm reviewing the real thing, and since Canon gouges the price at $, there are plenty of knock-offs available that do the same thing for one-tenth the price.I presume they work, but will fall apart if you. Remote switch for EOS cameras with the N3-type socket. This remote switch has a self-timer, interval timer, long exposure timer and exposure-count setting feature. The timer can be set from 1 second to 99 hours. A new dial enables you to easily enter the numeric settings with a single thumb. It has an illuminated LCD panel and a ft/80cm cord. Remote Switch RSN3 / TCN3. Once connected to the camera, the switch enables you to shoot remotely over a wired connection. For operating instructions, refer to the accessory instruction manual. Open the terminal cover. Connect the plug to the remote control terminal.
Canon Timer Remote Controller TCN3 Review The basic reason for using a remote release is to release the camera shutter without causing movement or vibration to the camera. Schedule your rental now: If you want to program a sequence of 80j3 at a given interval you must set the exposure count to an amount greater than one. For unattended shooting, focus manually. Long Exposure Mode 1. Press the Jog Dial to select the time unit you wish to set. The shutter will release when the timer reaches zero 0. QuickGuide to Canon TCN3 Timer/Remote Controller. To clear the hold mode, hold the Display Illumination button for at least 3 seconds to toggle off the mode. The TCN3 Timer/Remote Controller is a programmable electronic shutter release. When you connect it to your EOS SLR or DSLR it will allow you to control: 1. When the shutter opens (self-timer mode) 2. How frequently the shutter opens (interval timer mode) 3. How long the shutter stays open (long-exposure timer mode).
0コメント